Philips Trilogy 100 Ventilator

We provide all types of ventilator in rental basis. Philips Trilogy 100 is one of the best ventilators which we provide our customer. It is very lightweight, versatile and easy to use. Philips Trilogy 100 offers best quality and simplicity for both clinicians and patients. Philips Trilogy 100 portable volume and pressure support ventilator is ideal for use at home or hospital. It has passive circuit option which uses single circuit with a passive exhalation port or mask with integrated leak. It is active with PAP circuit option supports proximal pressure sensing. The Active with PAP circuit option uses a single limb circuit and a proximal pressure sensor and active exhalation device. The Flow Trigger initiates when the patient’s inspiratory effort creates a flow equal to or greater than the flow sensitivity setting. It provides for an indication of the delivered tidal volume (Vti). It has direct view ventilation management reporting software for prescription management. Data can be exported into most statistical applications in an open format for clinicians to share for further analysis.

Description

• Includes 3-hour internal and 3-hour detachable batteries
• Weighs 5 kg (11 lb.)
• Ability to connect to an external lead acid battery Direct View Ventilation Management Software Trilogy100 provides ventilation data and prescription management through the use of an SD memory card.

Environmental Specifications

• Temperature: 5°C – 40°C
• Relative humidity: 15% – 95%
• Atmospheric pressure: 110 kPa to 60 kPa

Physical Specifications

• Weight: 11 lbs, 5 kgs
• Size: 6.6?L x 11.2?W x 9.3?H (16.68 cm L x 28.45 cm W x 23.52 cm H)

Controls

• Circuit types: Active with PAP, passive
• Ventilation types: Volume control, pressure control, bi-level
• Volume modes: AC, SIMV (w/PS), CV
• Pressure modes: CPAP, S, S/T, T, PC-SIMV (w/PS)
• IPAP: 4 – 50 cm H20
• EPAP: 0 – 25 cm H20 for active circuits; 4 – 25 cm H20 for passive circuits
• CPAP: 4 – 20 cm H20 for passive circuits
• PEEP: 0 – 25 cm H20 for active circuits; 4 – 25 cm H20 for passive circuits
• Pressure support differential: 0 – 30 cm H20

Measured Patient Parameters

• Tidal volume: 50 – 2000 ml
• Relative humidity: 15% – 95%
• Inspiratory time: 0.3 – 5.0 secs
• Rise time: 1 – 6
• Ramp start pressure: 0 – 25 cm H20 for active circuits; 4 – 25 cm H20 for passive circuits; 4 – 19 cm H20 in CPAP mode
• Ramp length: Off, 5 – 45 minutes
• Flex: Off, 1 – 3
• Flow trigger sensitivity: 1 – 9 l/min
• Flow cycle: 10% – 90%
• Apnea rate: 4 – 60 BPM
• Tidal volume: 0 – 2000 ml
• Minute ventilation: 0 – 99 l/min
• Respiratory rate: 0 – 80 BPM
• Leak rate: 0 – 200 l/min
• Respiratory rate: 0 – 80 BPM
• Peak inspiratory flow: 0 – 200 l/min
• Peak inspiratory pressure: 0 – 99 cm H20
• Mean airway pressure: 0 – 99 cm H20
• Percentage patient triggered breaths: 0 – 100%
• I:E ratio: 9.9:1 to 1:9.9

Alarms

• Circuit disconnect: Off, 10 – 60 secs
• Ventilation types: Volume control, pressure control, bi-level
• High tidal volume: Off, 50 – 2000 ml
• Low tidal volume: Off, 50 – 2000 ml)
• High minute ventilation: Off, .1 – 99 l/min
• Low minute ventilation: Off, .1 – 99 l/min
• High respiratory rate: Off, 4 – 80 BPM
• Low respiratory rate: Off, 4 – 80 BPM